![]() |
|
|
|
#1
|
||||
|
||||
79 TD, brake pressure causes shake in wheel and a slight pull
Now this feels more like suspention issues than rotor warpage, although I am sure there is some warpage as well. when the brakes are pressed at higher speed, there is a solid pulsing of the steering wheel and the car kinda shimmies. could worn a-arm bushings cause this? I would think so, the one side would pull the steering to that side, then as the rotor pulsed, the car would shimmie. sound plausable?
John
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 560SL convertible 1987 190D 2.5-5SPEED!!! ![]() 1987 300TD 2005 Dodge Sprinter 2500 158"WB 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#2
|
||||
|
||||
Shimmy- warped rotor
Pulling- miss alignment, front suspension worn somewhere Dave
__________________
1970 220D, owned 1980-1990 1980 240D, owned 1990-1992 1982 300TD, owned 1992-1993 1986 300SDL, owned 1993-2004 1999 E300, owned 1999-2003 1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD 1988 560SL, 100,000mi, owned since 1995 1965 Mustang Fastback Mileage Unknown(My sons) 1983 240D, 176,000mi (My daughers) owned since 2004 2007 Honda Accord EX-L I4 auto, the new daily driver 1985 300D 264,000mi Son's new daily driver.(sold) 2008 Hyundai Tiberon. Daughters new car |
#3
|
||||
|
||||
pulling also may be a tire low on air. actually it is more likely than an alignment problem, imho.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual. ![]() ..I also have a 427 Cobra replica with an aluminum chassis. |
![]() |
Bookmarks |
|
|