|
|
|
#1
|
||||
|
||||
overboost solenoid on 300 sdl location help??
Where is the overboost solenoid located on the 86 300 sdl? I need to check the lines. I cleaned the alda line and my car is still a dog. I'd like to adjust the alda like others also.
|
#2
|
||||
|
||||
Right against the firewall on the driver side. Has the two vac lines running to it along with an electrical harness.
If you blow air into it, the air should blow out. If not, it's plugged.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#3
|
|||
|
|||
If you cleaned the ALDA line, you removed one end from the overboost solenoid.
|
#4
|
||||
|
||||
cap on top, markings 1,2,3 on the side? just fwd of the master cylinder?
I pulled the top vac line and blew into the unit. relatively easy. fnd the fitting on the intake blocked. U have luck with the adjustment to the alda? |
Bookmarks |
|
|