|
|
|
#1
|
||||
|
||||
Dash master harness wiring diagram
I took out my dash to repair the odometer (thanks dieselgiant), but when I took off the master harness the back cover popped off and the wires popped out of the harness connector. I tried to connect it the way I thought it came out, but now my fuel and temp gauges don't work (let alone the turn lights etc).
Does anyone have a wiring diagram for the harness on a 300d? Thanks in advance!
__________________
----------------- 1980 300D 300K KM - parting out 1979 300D 375K KM - parting out 2 300Ds for sale |
#2
|
|||
|
|||
I have the '82 diagrams.
|
#3
|
||||
|
||||
You have a ground problem
If those gauges don't work, most probably you have a ground problem. Try getting your fingers down around the lower corners of the instrument panel and "teak" it in or out just a little.
__________________
Junqueyardjim Christianity, if false, is of no importance, and if true, of infinite importance. The only thing it cannot be is moderately important. C.S. Lewis 1983 Mercedes W123 240D 4 Speed 285,000 on the road with a 617 turbo, beautiful butter yellow, license plate # 83 240D INDIANA 2003 Jaguar Type X, AWD. beautiful, good mileage, Mom's car, but I won't let her drive it! |
#4
|
|||
|
|||
gauges on 300D instrument panel
A while back my gauges, temp and fuel were going crazy always oscillating from min to max. I experimented around moving inst. panel in and out of dash. On my 84 300D by leaving top right corner out slightly, the gauges are stable and read approximately correct. bubba z
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|