Hi guys,

I've ready many of the posts on the dreaded/despised chrysler designed heater (climate control) servos.

I got my 300D a few months ago and after repairing many items (glow plug relay system, speedo cable, rear axles, front brakes/calipers/rotors), and I'm getting around to the HVAC now.

When I got my car, 2 hoses were missing from the heater servo. I discovered this when I first tried the heater (while 60 miles from home), and all the antifreeze leaked out. Of course, the benz heated up immediately, and I was out in the country with no tools. I had to get towed home.

When I got home, I discovered the missing hoses and I simply connected the 2 ports together with a heater hose to stop the leak.

In spite of reading the other posts, looking the chrysler manual for the servo, reading my benz and haynes manual, I can't find anywhere that tells me where these two hoses need to go.

Can anyone send me a diagram and/or pictures to show where the hoses go to/from the servo? I can't find any other obvious open connections anywhere under the hood where the two missing hoses would be routed.

Thanks for you help,

Jason