I am replacing my injectors tomorrow I need to know what to torque them to and any other traps that may be involced.

__________________
Keith Schuster
2006 E350 98K miles
2013 Ford Explorer 15K miles

Having the correct socket is the first step...606-589-00-09-00

Torque is 40Nm.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Got that so what are the torque values?

__________________
Keith Schuster
2006 E350 98K miles
2013 Ford Explorer 15K miles

Vacuum everything out before you pull them so nothing falls inside.

ps: If you don't mind sharing what did the injectors run?

__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)

Are you sure? That doesn't seem right. It's only 5 Nm higher than the delivery valve seals. With such a feeble torque I'd imagine big compression leaks around the injectors.

__________________
2004 VW Jetta TDI (manual)

Past MB's: '96 E300D, '83 240D, '82 300D, '87 300D, '87 420SEL

Got them from Phil at Fastlane ran $520 including core charges $418 less core charges. Sorry Donny I did not see the torque value and thanks to all

__________________
Keith Schuster
2006 E350 98K miles
2013 Ford Explorer 15K miles

I'd think you could get them rebuilt at a bosch shop for a small fraction of that. Since they are charging a core you may just getting rebuilts anyway and I always prefer getting my own parts rebuilt rather than someone elses...that way I am sure they are all the right part and haven't been mistreated.

Make sure you renew the seal rings under the injectors too, BTW.

__________________
Marty D.

2013 C300 4Matic
1984 BMW 733i
2013 Lincoln MKz

Marty I usually do that too but travel commitments with work prevent me from having my car down for the time it takes for the local Bosch shop to rebuild. I am counting on Phil and the Parts Shop folks to have the highest quality parts and they have never let me down so far. Yes these are reman too I will post my findings.

__________________
Keith Schuster
2006 E350 98K miles
2013 Ford Explorer 15K miles

And where did you find them?