|
|
|
#1
|
|||
|
|||
A Place to rebuild my Tranny In Denver.
I was wondering if there was a reputable place here in denver or the surroundings that could rebuild my tranny.
__________________
-Trevor OBK #12 1980 300SD 333,XXX miles - Totaled 1986 Mazda RX-7 212,XXX miles - impounded and auctioned off 2005 Jeep Liberty CRD Limited 33,000- SEGR, Provent, Fumoto |
#2
|
||||
|
||||
For lack of anything better to suggest, I would ask CVJ Axles. They might know of a place.
http://www.cvjreman.com/index.php
__________________
"Buster" in the '95 Our all-Diesel family 1996 E300D (W210) . .338,000 miles Wife's car 2005 E320 CDI . . 113,000 miles My car Santa Rosa population 176,762 (2022) Total. . . . . . . . . . . . 627,762 "Oh lord won't you buy me a Mercedes Benz." -- Janis Joplin, October 1, 1970 |
#3
|
|||
|
|||
i drive past CVJ prolly 8 times a week
__________________
-Trevor OBK #12 1980 300SD 333,XXX miles - Totaled 1986 Mazda RX-7 212,XXX miles - impounded and auctioned off 2005 Jeep Liberty CRD Limited 33,000- SEGR, Provent, Fumoto |
#4
|
|||
|
|||
Try German Motors in Lakewood, 303.237.6262/6021. I don't know if they rebuild trannies, but they are a Mercedes-only shop and reputable. They may be able to point you in the right direction. Or I'd be willing to bet ForcedInduction knows a good shop.
|
#5
|
|||
|
|||
Actually, I don't know. I'm the only person I will allow to fix my car.
You can try Star Tech Mercedes in Littleton. I know they have a great reputation but I don't know what services they offer. |
#6
|
|||
|
|||
Anyone here ever rebuild their own tranny?
__________________
"spreading a trail of obnoxious where ever we go" 1981 300sd w/ 341,500 miles http://www.wecrash.com/pics/ddda_banner.gif |
#7
|
|||
|
|||
Startech's in central Denver (I-25 and Santa Fe). Stu Ritter's old shop on south Inca might do it or know someone who would.
Kerry
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#8
|
|||
|
|||
i'd like to be the only one who works on my cars but i am not from the area so i don't have the space to do it.
I was the one who replaced the engine on my Mazda, and if i could find the space here i would also try to do the rebuild on my tranny.
__________________
-Trevor OBK #12 1980 300SD 333,XXX miles - Totaled 1986 Mazda RX-7 212,XXX miles - impounded and auctioned off 2005 Jeep Liberty CRD Limited 33,000- SEGR, Provent, Fumoto |
#9
|
||||
|
||||
Yes..several of us have. It's doable but requires being very meticulous and clean. A detailed manual is critical and if you can find something that supplements the crappy pictures in the ATSG manual it's a big help.
A transmission holding fixture is also HIGHLY recommended otherwise taking tolerance measurements (on the order of 10ths of a mm) is going to be suspect. I would rate the tranny a 9/10 on the DIY scale..just under rebuilding the bottom end of an MB diesel motor. That's subjective though as I've never attempted the latter. Valve body rebuild gets an 11 on a scale of 10.
__________________
1982 300TD 210K miles ("The Replacement" aka "The Anvil") - SOLD 1979 300SD 245K miles (never ending project) 2007 Pinarello F3:13 1995 Ducati 916 (SOLD, sniff) 1999 Ducati 900SSie (SOLD) |
#10
|
|||
|
|||
Kerry & Forced
thanks for the suggestion but thy will not rebild one. they only replace with a factory reman. and the cost is $4000 for the tranny only. The friend where the car is at now has a guy that rebuilds trannys and he is checking if he will do a mercedes. This guy has never had a tranny fail so this might be a more viable option.
__________________
-Trevor OBK #12 1980 300SD 333,XXX miles - Totaled 1986 Mazda RX-7 212,XXX miles - impounded and auctioned off 2005 Jeep Liberty CRD Limited 33,000- SEGR, Provent, Fumoto |
#11
|
|||
|
|||
Yikes!
Someone (Forced?)posted a few weeks ago that there were some 123's at the Pick and Pull in Aurora. Perhaps there's a transmission for you there. It only took me an hour or so to pull a manul tranny from a 123 there since the cars are high up on rims, making the job pretty easy.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 Last edited by kerry; 02-16-2007 at 07:15 PM. |
#12
|
|||
|
|||
$4000?
I agree with Kerry, if you feel that you can remove the tranny yourself, Pull-N-Save is the best option. http://www.pullnsave.com/ |
Bookmarks |
|
|