Diesel Purge = Tune-Up In A Bottle!!!! Ten Steps To A World Of Difference!

[300EVIL]

WOW! MAGIC LUQUID!!! This stuff is amazing!

Procedure:.... (What I did at least)

1. Let the engine warm up to operating temp for 10 minutes.
2. Filled beaker with 500mL of Lubro Moly Diesel Purge.
3. Disconnected fuel in line pre filter and attached a new line which was placed at the bottom of the beaker.
4. Disconnected return line and placed it at top of beaker.
5. Started engine and let run for 5 minutes at idle.
6. Tapped the throttle many times to WOT.
7. Slowly increased the throttle to 3500RPM or so for 2 minutes.
8. Let the engine idle off the rest of the diesel purge until almost empty- another 3 min.
9. Reconnected return line
10. Reconnected fuel line.

Now for the test drive......

OMG!

Absolutely amazing difference!

1. Sounds WAY BETTER. No more clanking and clicking!
2. Starts MUCH BETTER. No more stumbling!
3. No more PARKINSONS SHAKE! Runs very smooth!
4. Acceleration is linear! Pedal actually feels like it makes a difference after 25% WOT!
5. Acceleration is WAY FASTER. 40-80 MPH Feels like a gas engine!


I am absolutely amazed how much a bottle of fluid made such a difference. I was doubtful at first, now I'm sold. I'd highly recommend this product to anyone who has not tried it on their diesel yet.
Thanks!
Adam