My trunk lock is difficult to insert the key into, and very picky about how deep the key is inserted to allow unlocking/locking. Is this a disassemble and clean fix, or a replace fix?

__________________
I suggest we solve high gas prices with environmentalists... unfortunately they don't burn well.
1982 300CD, 220K miles: This vacuum system will be the death of me yet! (OBK #26)
1977 F150 400 C6 2wd, 10.2 sec 1/8 mile with 2.75 gears.
1965 Mustang. Mostly stock... LOL!
2001 Ram 2500, cummins, 5spd, 202k miles.(girlfriends)

Probably a combination of worn key and dry lock tumblers. Key depth usually is a miscut replacement key. Hard to insert is a dry lock. As with any lube issue try WD 40 first!

__________________
81 300CD (sold) 1972 280 SEL 4.5 (sold) 1966 250 S 4 spd (sold) 1974 450 SL (sold) 86 BMW 325ES (sold), 1973 280C (sold) 1988 300 SE.

Tried a generous dose of WD40. A little better, briefly. I'm thinking disassembly and proper lubrication may be the best route.

__________________
I suggest we solve high gas prices with environmentalists... unfortunately they don't burn well.
1982 300CD, 220K miles: This vacuum system will be the death of me yet! (OBK #26)
1977 F150 400 C6 2wd, 10.2 sec 1/8 mile with 2.75 gears.
1965 Mustang. Mostly stock... LOL!
2001 Ram 2500, cummins, 5spd, 202k miles.(girlfriends)

Disassembled the lock, cleaned dried grease and lint out, found one pin missing, and destroyed the spring that holds the ball during assembly. Ooops. It works better now. It will lock and unlock with the key fully inserted now, but is still catchy. I think it's just worn out.

__________________
I suggest we solve high gas prices with environmentalists... unfortunately they don't burn well.
1982 300CD, 220K miles: This vacuum system will be the death of me yet! (OBK #26)
1977 F150 400 C6 2wd, 10.2 sec 1/8 mile with 2.75 gears.
1965 Mustang. Mostly stock... LOL!
2001 Ram 2500, cummins, 5spd, 202k miles.(girlfriends)