|
|
|
#1
|
||||
|
||||
300D Hood Ornament
After washing the car today, the hood ornament now falls over in the wind. Is there a fix for that or is it new ornament time?
Thanks!
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#2
|
||||
|
||||
new ornament time.
New ones are all shiny and clean in the box |
#3
|
||||
|
||||
That's what I thought.
New sounds good to me!
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#4
|
||||
|
||||
I think there is a spring that holds it up. Remove the hood star (just twist the "cage" around the mount) and take a look.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#5
|
||||
|
||||
I've tried to get the hood star out, but for some reason I can't. I can hear springs making noises as I move it around though.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#6
|
||||
|
||||
You may need pliers to twist it. That thing is tough. Pull down and twist ccw (looking from the bottom)
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#7
|
||||
|
||||
Ok, from the bottom. That makes sense.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#8
|
||||
|
||||
The star may be damaged to the extent that you will need to remove pin on the bottom. Should pull out from top after that, clamp from bottom. To install new star, it should just drop in, otherwise rotate "u" shaped clamp till in position to drop in. Using channel locks, grasp bottom edge of clamp, pull down, rotate cw, release pliers on spring. Do not squeeze sides. Hope this helps.
__________________
83 SD 84 CD |
#9
|
||||
|
||||
Would it be easier to remove the grill first?
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#10
|
||||
|
||||
Not much easier...
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#11
|
||||
|
||||
Ok. I was just wanting it to be a bit easier than playing the reach into the tiny space with pliers...
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#12
|
||||
|
||||
No need to remove grill, just be careful not to bang your head. Did mine in about five minutes. You'll understand better when you get the new star.
__________________
83 SD 84 CD |
Bookmarks |
|
|