mine are cracked and i got replacements. do i have to remove the door panel ? or can i just yank up and remove it. didn't want to try it just in case i break something. if i do have to remove the door panel, is it real hard to do this job ? thanks.

Attached Thumbnails

 

__________________
1982 240D 4spd 232k (deceased)

You have to remove the trim on the outside, panel on the insde. Removing the panel is a cinch. 2 screws on the chroms trim by the latch, remove lock knob, 2 screws in the armrest, pop the black plastic out of handle undo screw. take a flast head around the edge of the panel and pop the plastic rivets. some models also have a screww by the footwell?

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

pull up on the lock knob or spin off ?

if i'm removing the door panel, are there other maintenance thing i can do while its all open ? parts i would need to order in advance ?
thanks !

__________________
1982 240D 4spd 232k (deceased)

spin off.

white lithium spray on window guides

__________________
83 300d - 390k