Tranny Front Pump removal
Anyone ever done that? Trying to swap mine out and got in there and now I'm not sure what to do. Thanks.
Josh |
How far did you get?
Pull the bellhousing off. Pull the bearing off the backside of the bellhousing. Unscrew the 4 retaining bolts on the backside. Find 2 bolts with same thead pitch but longer- screw them in the holes . Tap on these bolts to push the cover off the front pump. Have a good cry. Rick |
for which model?
|
It's a 79 300sd.
|
Rick, I have the bellhousing off. So do I need to swap the bearing on the bellhousing too? I took the 3 screws off of the front of the pump but there is also a little flat clip I need to take off then it looks like the pump will slide out. Maybe I'm wrong.
|
Lonesome-
I don't recall a clip, but maybe there is ( 2 years since I did this). I guess I would keep the old bearing if it isn't sloppy. You may need to swap stators as well- mine was damaged too. Rick |
All times are GMT -4. The time now is 06:55 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website