Head Gasket Estimate
Hey All,
I have a 1996 E300 with 167,000 miles and I know I've got a head gasket leak from the rear of the block passenger side (I've read a few posts with similar symptoms) I did thwe work on my gasser (W201 -190E 2.6) and didn't mind as the car had 310K miles on it, bu this I'll give to the experts. 1. What is a reasonable cost including rebuilding (milling etc) the top 2. What else should I do while the beast is apart? *(Injectors? Waterpump? Timing Chain?) |
If a shop does the head gasket, you're looking at $1200. on that vehicle. This is just the R & R of the head and the various parts needed to reinstall it.
Once the head is off, you'll need to decide how much you wish to spend on it. Valves.......seats.........guides.........seals.........prechambers..........are all individual items that need to be evaluated for condition and with a determination of how many additional miles you wish for them to continue. |
I had the head re-worked on my donor engine before I put it in. I believe the shop work was $280 and they installed new exhaust valve guides, checked and planed the head, and cleaned out the tons of EGR crud in the intake valves. I think the head gasket for my car was about $50, plus misc gaskets and such. I also did the timing chain which was another $140 or so. I did all the labor myself. Its really not that bad.
Keep in mind that this is for an OM617, not a 606 so your costs may differ. Just thought I'd throw it in there. |
i allways call it 50$ a cylinder for everything. so 5cyilnder, 250$ sounds about right. six, 300$ sounds about right.
|
All times are GMT -4. The time now is 08:15 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website