Does anyone know the stock thicknes of the spring pads? I need new ones any way and plan to go with a little thicker for the new Vogtland springs. Also, do I need one or two for each spring?

__________________
1985 300D burning WVO using 26 FPHE, half gallon heated fuel filter,glow plug heater,home made injection line heaters. Home made cold air induction. ALDA full out.
2003 F350 7.3(the last of the great motors)
1987 Paint Horse-non running too, just walks!

Anyone?

__________________
1985 300D burning WVO using 26 FPHE, half gallon heated fuel filter,glow plug heater,home made injection line heaters. Home made cold air induction. ALDA full out.
2003 F350 7.3(the last of the great motors)
1987 Paint Horse-non running too, just walks!

the thickness of the pads vary according to how the car is equipped. I think there are usually around three thicknesses available.

one per spring. the thicknesses are listed in the fsm.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

You will want a lower number in the front and higher in the rear. 1/2 or 2/3

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42