|
|
|
#1
|
||||
|
||||
Hood Latch Pull VERY broken, how to open?
I need to open the hood of the 81 300SD and the inside hood pull is very broken. It was a little broken until just 10 minutes ago when I really finished breaking it. The wire that pulls the hood is now broken far up into the dash.
I was able to locate a small section of it at the front of the car under the hood and pull on it (of course taking the wire further away from the inside of the car) and open the left side of the hood. But the right side won't unhook no matter how hard I pull. I need to get into the engine, so boys how do I do this now? Thanks, as always,
__________________
Ginny in Denver-ish 78 300SD, 265K (mine) |
#2
|
||||
|
||||
Use a bent coat hanger through the grille to hook the latch.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#3
|
||||
|
||||
pull hard with vise grips to the driver side fender .....amlost like your trying to pull it around the car to the drivers wheel....and push down a lil on the hood to make it softer on the cable.
__________________
Wie lange wird Ihr Auto leben? |
#4
|
||||
|
||||
Quote:
I have a piece of cardboard in front of the radiator for added heat and the cardboard hides the latch so the coathanger thing won't work. I did search and all the threads were the coathanger trick. Is there a way to fix this so the car opens from the front and not from the inside?
__________________
Ginny in Denver-ish 78 300SD, 265K (mine) |
#5
|
|||
|
|||
you could install clips similar to the 115 not sure if they are compatible but im sure you could jerry something up for it. you may be able to find some clips from a 115 from someone here.
keep truckin adam
__________________
'79 240D '79 300SD those that are missed: '80 300TD bandit '76 300D cleta jill |
Bookmarks |
|
|