Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 03-21-2008, 05:24 PM
imagesinthewind's Avatar
I SK8 Roller Derby!
 
Join Date: Mar 2006
Location: Denver-ish
Posts: 953
Tstat replace, burped, now runs hot, help?

Okay, so the greasecar wouldn't get warm for a long time. Unclipped mono and no change so decided it was the tstat. Replaced it today, car warmed up at idle very nicely. Too nicely.
Now at idle it can get over the 100 mark on the gauge.
Burped by putting nose up (drive is uphill so put it in the driveway) and idled for 40 mins or so. Started getting hot at about 20 mins. I turned the defrost on high and that allowed the gauge to go down. But only to just above 80.

Went to pick up the DD, about 8 miles, and the temp gauge went high again. Went lower with the defrost on. But again, not to 80 mark.

I want to drive it tonight to the bar but don't want to overheat on the hwy.

Any other ways to burp?
Thanks
__________________
Ginny in Denver-ish
78 300SD, 265K (mine)
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page