http://www.**************.com/node/5180 I got this email from ************** .com today. What do the injector pros think. Is it worth it. etc

You're joking right? Its a bottle jack, some off the shelf fittings and an old injector line. It probably cost them less than $75 to make!

Another rip-off from Mercedes$ource.

I don't know, there's some machining involved, and finding the fittings is a PITA...but it gives me a good idea for my CIS injection tester - I built one to test/clean injectors but it uses compressed air to push the fluid and I don't think this is the best way to go.

__________________
86 560SL
With homebrew first gear start!
85 380SL
Daily Driver Project

http://juliepalooza.8m.com/sl/mercedes.htm

can a bottle jack survive pumping diesel fuel for long? one would think the seals would disintegrate after a while... looks simpler than the grease gun testers I have seen... I would have put the gauge on the side connector to eliminate air in the gauge better... how much pressure can the cheapo galvanized 1/4" pipe tee handle?
hey, it does come with the Mercede$$ource instruction manual for free!!! that's gotta be worth the 150/160 purchase price!


hey, I just noticed they have injector shims for sale... anybody else know where to order shims from?

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!

1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

You can get an injector nozzle shim kit at USDiesel
http://www.usdiesel.com/





Have a great day.

__________________
ASE Master Mechanic
https://whunter.carrd.co/

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
2003 Volvo V70

https://www.boldegoist.com/

Try one of these near you!


http://www.boschservice.com/ServiceLocations/ImageMapResults/ImageMapResults.htm?st=NC&typ=DF&cntry=USA

Attached Thumbnails

 

__________________
'84 300SD sold
124.128

$75 if that much. MY question is... when the clockwork inside the gauge goes *p-TING* after pattern testing (pumping in rapid succession WITHOUT a shutoff valve) who covers repair or replacement?

__________________
1987 300D (230,000 mi on a #14 head-watching the temp gauge and keeping the ghost in the machine)
Raleigh NC - Home of deep fried sushi!

Im pretty sure I saw this bottle jack at harbor freight. The orange color is also kinda there trademark.

about the price, well, the man did have to find the proper fittings, maybe even have them machined to fit, source all the parts, assemble the thing, pay for his website, pay his employees and himself, rent, electricity, tax, etc. etc. so he is entitled to a profit.

It looks very simple, but im sure he spent many hours trying different combinations to get it to work, etc. Maybe we will have a member try to make his own and he will tell us how much time he spent sourcing all the parts and assembling it? Kinda reverse engineer it, lol.

Personally, I dont have that many diesels and since injectors are done every 100,000 miles, I would rather pay a professional to rebuild and balance mine than monkey around with it myself.

What I want to know is, where is the Filter?

__________________
For Sale: 1982 MB 300TD
1995 Chevrolet Suburban 6.5TD

Sold: 1980 IH Scout Traveler- Nissan SD33T Diesel

Its hard to tell from the picture, but if you look in the "fuel tank", it looks like there *might* be one inside. Right where the bottle and jack connect something is a little darker. It could just be a shadow too...

It would be a good question for someone to call and ask him

I have one of these that I made, but I could never find a suitable filter. Thats why I'm wondering. Anybody have a good idea?

__________________
For Sale: 1982 MB 300TD
1995 Chevrolet Suburban 6.5TD

Sold: 1980 IH Scout Traveler- Nissan SD33T Diesel

remember to use vegetable oil instead of diesel.. yes it will destroy the seals quickly, but i dont think you would want to loose your finger because diesel was injected into it, where as vegetable oil, your body absorbs it.

__________________
Have you ever noticed that anybody driving slower than you is an idiot, and anyone going faster than you is a maniac?

As long as they would add one additional commandment for you to keep thy religion to thyself.
George Carlin (Wonder where he is now..)

1981 240d (engine donor 1983 240d) recently rebuilt engine hurray! - No more.. fought a tree and the tree won.

pearl black 1983 240d 4speed (Converted!@$$%) atleast the tranny was rebuilt.

How about I just keep my fingers out of the injector spray!!!

__________________
For Sale: 1982 MB 300TD
1995 Chevrolet Suburban 6.5TD

Sold: 1980 IH Scout Traveler- Nissan SD33T Diesel

My 40+year old Buda injector tester is based on a bottle jack. Seems like a good way to make one.
The problem I see with the featured tester is holding it securely while pumping to building pressure.

the directions say to bolt it to your bench. seems like they put some time and effort into it so they deserve to get what the market will bear, according to the advert they cant make them fast enough so I doubt a price break is coming any time soon

__________________

1982 300CD Turbo (Otis, "ups & downs") parts for sale
2003 TJ with Hemi (to go anywhere, quickly) sold
2001 Excursion Powerstroke (to go dependably)
1970 Mustang 428SCJ (to go fast)
1962 Corvette LS1 (to go in style)
2001 Schwinn Grape Krate 10spd (if all else fails)