|
|
|
#1
|
||||
|
||||
EGR reconnect pics please
I am dropping my smokey white friend off for a state inpection tomorrow morning. I would like to reconnect the EGR, to avoid any possible problems. I have looked all morning for some pics to use as reference with no luck. I am sure they are out there, I just can't seem to find them. Thanks in advance!
__________________
Rich B 1983 300D Turbo 205k Excuses are crutches for the weak |
#2
|
|||
|
|||
The easiest reconnect method is to install a set of intake and exhaust manifolds from a 78-80 300SD.
|
#3
|
||||
|
||||
My apologies. I was not specific enough. What I need to do is reconnect the vacuum lines to the EGR.
__________________
Rich B 1983 300D Turbo 205k Excuses are crutches for the weak |
#4
|
|||
|
|||
There should be a vacuum tube diagram on the radiator support. If nothing else just run a vacuum line to is with a BB inline.
|
#5
|
||||
|
||||
My SDL has been through emissions once with the EGR blocked off and removed, before I just had a plate in their and everything hooked up. So unless you looked close you couldn't see it.
After the guy doing it had to pop the hood to count the cylinders because he thought it was five...I knew I was pretty safe.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#6
|
|||
|
|||
There is only one vacuum line to it. What else did you need pics of?
after this refer to the vacuum diagram sticky @ top of page |
Bookmarks |
|
|