PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Diesel Discussion (http://www.peachparts.com/shopforum/forumdisplay.php?f=15)
-   -   brake rotor specs: '97 E300 (http://www.peachparts.com/shopforum/showthread.php?t=231752)

lupin..the..3rd 08-31-2008 02:54 PM
brake rotor specs: '97 E300
 
Does anyone have the new & replacement rotor thickness specs for W210?

I just changed the pads and noticed the rotors have a little lip on them. I measured the front rotors at .925" and .924" and am wondering what the replacement thickness is?

Thanks!

tangofox007 08-31-2008 03:18 PM
Minimum thickness is often stamped on the rotor, sometimes on the outer edge.

lupin..the..3rd 08-31-2008 03:23 PM
Yes, I looked there and unfortunately, the outer edge is so rusty I can't make out the numbers. :(

Matt L 08-31-2008 03:25 PM
This is for 210.020, 1997.

Front brake disk thickness: New 25mm, Service limit 22.4mm, Service limit when performing maintenance 23mm.

Rear brake disk thickness: New 9mm, Service limit 7.3mm, Service limit when performing maintenance 7.6mm.

Matt L 08-31-2008 03:27 PM
23mm is .906 inches. You're OK for now.

lupin..the..3rd 08-31-2008 11:53 PM
Perfect, thanks Matt! :)


All times are GMT -4. The time now is 08:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website