|
|
|
|
|
#1
08-31-2008, 02:54 PM
|
|||
|
|||
|
brake rotor specs: '97 E300
Does anyone have the new & replacement rotor thickness specs for W210?
I just changed the pads and noticed the rotors have a little lip on them. I measured the front rotors at .925" and .924" and am wondering what the replacement thickness is? Thanks!
__________________
'98 E300 turbodiesel 
|
|
#2
08-31-2008, 03:18 PM
|
|||
|
|||
|
Minimum thickness is often stamped on the rotor, sometimes on the outer edge.
|
|
#3
08-31-2008, 03:23 PM
|
|||
|
|||
|
Yes, I looked there and unfortunately, the outer edge is so rusty I can't make out the numbers.
__________________
'98 E300 turbodiesel
|
|
#4
08-31-2008, 03:25 PM
|
|||
|
|||
|
This is for 210.020, 1997.
Front brake disk thickness: New 25mm, Service limit 22.4mm, Service limit when performing maintenance 23mm. Rear brake disk thickness: New 9mm, Service limit 7.3mm, Service limit when performing maintenance 7.6mm.
|
|
#6
08-31-2008, 11:53 PM
|
|||
|
|||
|
Perfect, thanks Matt!
__________________
'98 E300 turbodiesel
|
 |
| Bookmarks |
|
|
Linear Mode
