Hello Members

Does anyone have a picture of how the front grill goes together from the back side.I only have a 126 to go by.There seems to be a lot more clips on the 126.


Thanks in advance.

Benjira

__________________

1972 SILVER 280SE
1989 SILVER 300 SEL
1984 DARK BLUE 300D EURO

It's dark out so a picture wouldn't turn out so well right now. If you can wait about 10 hours then I can take a picture.

Here are a couple, the first one is obvious.
The second pic looks like it's missing a screw, that is the top most clip on the drivers side.

Attached Thumbnails

   

__________________
83 SD

84 CD

The rest of the pics won't load, I'll try again later.
On mine, the middle attachment point does not have a screw, designed that way.
The lower side mount does have a screw and rubber clip.
The very bottom in the middle has a sheet metal screw.

__________________
83 SD

84 CD

2 clips on either side;

Attached Thumbnails

 

__________________

Don't Chrome them; polish them

In addition, there are two fasteners one on top and one below. A philips screw below and an 8mm nut on top. The chrome strips just slide outwards from the plastic grille.

The lower side mounts have an opening for two screws, that hold the rubber tabs that prevent the grille from scratching the panel under the headlights on the inboard side, when closed.

__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg

Ah, the top side mounts screw into the hood, which is why mine are missing.
The rest of the pics have loaded.
This grill is off the car.

Attached Thumbnails

     

__________________
83 SD

84 CD

Thanks Guys

I almost have her back together,of course I misplaced the 8MM nut that holds the emblem on. I appreciate the pictures,you guys rock.


BB

__________________

1972 SILVER 280SE
1989 SILVER 300 SEL
1984 DARK BLUE 300D EURO