My Superior Shift Kit thread (W124 300DT)

[okcraig]

I was under told this was an early model but I could be wrong. It had three springs in the original configuration, however it didn't have any of the plasitc internal pieces.. I'll check to see if the red spring is narrower. However, the shorter blue spring still doesn't fit inside the accumulator. Thanks for your help.

I did go ahead and assemble it using the red spring and the original shorter spring in place of the short blue one. Unfortuneately once I got everthing together the transmission will not engage in any gear. Still checking it though. TIA

[tangofox007]

Originally Posted by okcraig

IUnfortuneately once I got everthing together the transmission will not engage in any gear.

There is a slot in the shift plunger that must be engaged when the valve body is reattached to the transmission.