Power Steering Pump Help!!
I am doing another engine swap and when I took the Power Steering Pump off my old engine, one of the mounts broke in 2 pieces. My local welder is closed for the weekend but....
Is there any replacement for mounting tabs without replacing the entire pump? These should have been a separate plate bolted to the pump not incorporated into the pump. It is off of my 91 350SD "rodbender". The pump is a Vickers Tandempump. |
The 90-91 350SD/L is gaining reputation as a pump breaker as well. From what I've read, you need a new tandem pump. Yours is no good as a core exchange either. Check with forum member Mekanic who just went through this but with a non-tandem pump. Maybe an 87 300TD tandem pump will work. If so, David Hendy in the parts forum might be able to help.
Sixto 87 300D |
Okay, I will try that. I do have two more pumps but one is not a tandem and the other uses smaller hoses.
Would the smaller hoses make a difference? |
So what did you do with the old block?
Sixto 87 300D |
Sorry about that, I was out transferring WVO for processing.
OMG, you should see all the Mercedes parts I have everywhere!!!! I have 2 rodbenders complete with IP, turbos, pumps, compressors, everything. I have an entire 87 300SDL complete, without the engine (it's in my 91 350SD now). That's why I was trying to make hoses and/or pumps fit. |
All times are GMT -4. The time now is 01:30 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website