|
|
|
|
|
|
#1
|
||||
|
||||
|
SDL Rebuild - What is this part?
I'm not sure what this is. It was in my baskets of engine parts for my SDL.
It may come to me eventually what it is, but right now, I have no idea. ![]() From the other side.
__________________
Michael LaFleur '05 E320 CDI - 86,000 miles '86 300SDL - 360,000 miles '85 300SD - 150,000 miles (sold) '89 190D - 120,000 miles (sold) '85 300SD - 317,000 miles (sold) '98 ML320 - 270,000 miles (sold) '75 300D - 170,000 miles (sold) '83 Harley Davidson FLTC (Broken again) :-( '61 Plymouth Valiant - 60k mikes 2004 Papillon (Oliver) 2005 Tzitzu (Griffon) 2009 Welsh Corgi (Buba)
Last edited by mplafleur; 02-21-2009 at 02:48 PM. |
|
#2
|
|||
|
|||
|
Not really sure on the 603, but it does look like a lifting bracket for the back of the engine..........similar to the 617.
|
|
#3
|
||||
|
||||
|
I think this is an internal part. It has engine oil on it. You can see that there was something bolted to it.
I'd like to put the oil pan and head on tomorrow. I don't want to leave something out. Although it's usually evident that something is missing.
__________________
Michael LaFleur '05 E320 CDI - 86,000 miles '86 300SDL - 360,000 miles '85 300SD - 150,000 miles (sold) '89 190D - 120,000 miles (sold) '85 300SD - 317,000 miles (sold) '98 ML320 - 270,000 miles (sold) '75 300D - 170,000 miles (sold) '83 Harley Davidson FLTC (Broken again) :-( '61 Plymouth Valiant - 60k mikes 2004 Papillon (Oliver) 2005 Tzitzu (Griffon) 2009 Welsh Corgi (Buba)
|
|
#4
|
|||
|
|||
|
Well, for internals.........you know the master........he'll know.
|
|
#5
|
||||
|
||||
|
But then, then whole engine was covered in engine oil. It is possible it is an outside part.
__________________
Michael LaFleur '05 E320 CDI - 86,000 miles '86 300SDL - 360,000 miles '85 300SD - 150,000 miles (sold) '89 190D - 120,000 miles (sold) '85 300SD - 317,000 miles (sold) '98 ML320 - 270,000 miles (sold) '75 300D - 170,000 miles (sold) '83 Harley Davidson FLTC (Broken again) :-( '61 Plymouth Valiant - 60k mikes 2004 Papillon (Oliver) 2005 Tzitzu (Griffon) 2009 Welsh Corgi (Buba)
|
|
#6
|
||||
|
||||
|
I don't know much about the 603, but those holes look to small to be a hoist bracket IMO.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
|
#7
|
||||
|
||||
|
That's not one of the bits that holds the turbo halves together is it?
-Jason
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket ![]() Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
|
#8
|
||||
|
||||
|
The turbo is off of course, but it is not apart.
It does have that round shape needed to go around something like a turbo though.
__________________
Michael LaFleur '05 E320 CDI - 86,000 miles '86 300SDL - 360,000 miles '85 300SD - 150,000 miles (sold) '89 190D - 120,000 miles (sold) '85 300SD - 317,000 miles (sold) '98 ML320 - 270,000 miles (sold) '75 300D - 170,000 miles (sold) '83 Harley Davidson FLTC (Broken again) :-( '61 Plymouth Valiant - 60k mikes 2004 Papillon (Oliver) 2005 Tzitzu (Griffon) 2009 Welsh Corgi (Buba)
|
|
#9
|
||||
|
||||
|
Your "from the other side" pic appears to be the same pic as the first....
Could that be a bracket for the exhaust? I'm guessing not if it's allen head.
__________________
Jimmy L. '05 Acura TL 6MT ![]() 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed'81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John Last edited by JimmyL; 02-21-2009 at 12:33 PM. |
|
#10
|
|||
|
|||
|
Are the bolts Allen head?
|
|
#11
|
|||
|
|||
|
Looks like a mounting bracket, perhaps for a power steering pump or something of the sort.
__________________
1987 W201 190D |
|
#12
|
||||
|
||||
|
I fixed the picture links.
Yes, they are allen head.
__________________
Michael LaFleur '05 E320 CDI - 86,000 miles '86 300SDL - 360,000 miles '85 300SD - 150,000 miles (sold) '89 190D - 120,000 miles (sold) '85 300SD - 317,000 miles (sold) '98 ML320 - 270,000 miles (sold) '75 300D - 170,000 miles (sold) '83 Harley Davidson FLTC (Broken again) :-( '61 Plymouth Valiant - 60k mikes 2004 Papillon (Oliver) 2005 Tzitzu (Griffon) 2009 Welsh Corgi (Buba)
|
|
#13
|
||||
|
||||
|
IIRC that's the bracket that holds the cruise actuator to the block. It attaches to the block just aft of the IP.
Sixto 87 300D |
|
#14
|
||||
|
||||
|
Thank you!
__________________
Michael LaFleur '05 E320 CDI - 86,000 miles '86 300SDL - 360,000 miles '85 300SD - 150,000 miles (sold) '89 190D - 120,000 miles (sold) '85 300SD - 317,000 miles (sold) '98 ML320 - 270,000 miles (sold) '75 300D - 170,000 miles (sold) '83 Harley Davidson FLTC (Broken again) :-( '61 Plymouth Valiant - 60k mikes 2004 Papillon (Oliver) 2005 Tzitzu (Griffon) 2009 Welsh Corgi (Buba)
|
|
#15
|
||||
|
||||
|
Is it?
Sixto 87 300D |
![]() |
| Bookmarks |
|
|