the time now is 10:30 pm i am at the internet cafe typing this i got here from home on idle (hope i can get back up the hills) i was crawling and could only shift up to the 3rd, it takes 10 minutes to get to town from where i live, it took me one hour to get here what i am trying to say is, yesterday i removed the regulating shaft of the gas peddle and because it wouldn't press properly and the manual was showing me a left hand drive vehicle so i thought the previous owner might have bent it wrong and made it into a regulating lever of a left hand drive car where as mine is right (Australian car) now i cant remember what it was like to get that shape, i got here without the gas peddle.
please please can some one take a picture of the regulating lever for me so i can get it back in shape my car is a right hand drive 1975 240D W115 2nd version.

i took the arm to a welding place and changed the shape of it not being aware that my manual was showing me a left hand drive cars arm now its all ugly and messed i hope i have been clear (used punctuation i am usually in a hurry to get home so that's why i make so many errors) i hope you know what i am referring to you its the arm from the gas pedal that connects on to the spring and the regulating shaft, that shaft which goes near the brake unit has an arm to which the link from that arm connects on to the intake.

The arm i am referring to has a rubber bush on it and the rod that connects on to it has like a hook to fit that rubber bush that's the arm that got messed can someone please post some pictures of this arm at a few angles so i can get it remade according to the picture you send me