|
|
|
|
|
#1
07-13-2008, 02:11 PM
|
|||
|
|||
|
Does this sound like bent rods? (Video)
The wife went fishing with the car (literally). Water came over most of the engine.
I've taken out the injectors and turned the engine over to get the water out. Changed the oil and transmission oil. Had to pull a few fuses to stop the electronics that were still wet from drawing current. It won't start. Here's what it sounds like. It's turning over slowly. Anyone looking for a challenge? Is there anyway to diagnose bent rods or valve stems without pulling the engine completely apart? http://www.pauldrayton.com/uploadfiles/merc/carfloodengine.html
__________________
1983 240D Silver/Blue "Sadie", unknown miles. 100k miles on WVO single tank, converted to 2 tank about 10k miles ago, FPHE, Injector Heaters, Aux Fuel pump. Alcohol/Water injection. Frantz oil bypass filter 1992 300D 2.5 Turbo Green/Tan "Jade" 267K miles Stock. 1992 300D 2.5 tan/tan "Rocky" on 2 tank WVO. Pressure actuated Turbo "rat's nest" surgery completed. 197k miles 
|
| Bookmarks |
|
|
Threaded Mode
