|
|
|
|
|
|
|
#1
08-18-2009, 10:54 PM
|
||||
|
||||
|
O-rings? I'm not aware that there are any o-rings in the injectors.
__________________
DJ 84 300D Turbodiesel 190K with 4 speed manual sold in 03/2012 
|
|
#2
08-19-2009, 12:40 AM
|
||||
|
||||
|
Quote:
Unless Heat Shields are considered O-rings by some folks.
__________________
84 300D, 82 Volvo 244Gl Diesel
|
|
#3
08-19-2009, 11:07 AM
|
||||
|
||||
|
Injectors
I don't know about the '80s, but in the late 70s, the injector bodies had a top and a bottom that screwed together. There was an O-Ring or compression gasket between them. Inside there was a high tension spring, and the needles. Did they change much in the 80s?
|
|
#4
08-19-2009, 12:30 PM
|
||||
|
||||
|
Quote:
They certainly must have. The injector bodies on the 80's injectors were assembled together using threads that have an interference fit elimimating any need for a gasket or o-ring.
__________________
DJ 84 300D Turbodiesel 190K with 4 speed manual sold in 03/2012
|
|
#5
08-19-2009, 12:54 PM
|
||||
|
||||
|
Quote:
All the injectors that went into the om 61x engines were like you state. No o-rings. I think the later ones are the same. But I've never dealt with earlier injectors.
__________________
Andrew '04 Jetta TDI Wagon  '82 300TD ~ Winnie ~ Sold '77 300D ~ Sold
|
 |
| Bookmarks |
|
|
Hybrid Mode
