|
|
|
#1
|
|||
|
|||
96 e300d
Does anybody no if you can lubricate the bearings on the radiator aux. fan?Thanks for any help.
__________________
84 300 Turbo / 320,000 96 E300 D / 55,000 |
#2
|
|||
|
|||
You can try but typically if they are stiff or noisy then it's already too late and replacement is due.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#3
|
|||
|
|||
You can change the bearing; there was a thread about it a few years ago. I did it; easy to get the right bearing and easy to do,but you need an arbor press to replace it.
|
Bookmarks |
|
|