|
|
|
#1
|
|||
|
|||
Can I turn on glow plugs during idle to do a test? If yes, how?
My SDL is running rough at idle sometimes with a slight knocking sound. I suspect it may be incomplete combustion or bad spray pattern. It always runs smooth during the 'after-glow' period ( I installed the 'after-glow' circuit with info from this forum ) then it runs rough sometimes until the engine is hot. I just want to do a test to turn on the glow plugs while it is running rough to see what difference does it make. It would only be a temporary test.
Any simple method?
__________________
300SDL project car |
#2
|
||||
|
||||
an even better test would be to get some #14 wire, and one by one insert it into each glow plug in the harness, and see if only certain cylinders smooth out the idle...
hook the wire to the positive terminal on the battery, then pull the harness for the glow plugs off the relay, push the wire into each numbered socket and see if the idle smooths out.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|