Part # for glow plug nut OM602
 

Just got my head back from the shop. Had a couple of bent valves replaced and the head checked for level. The shop also checked the glow plugs so I left them in the head when I sent it in. Well 3 of the glow plugs came back without the nuts on them and the shop claims they don't have them. I realize that they are usually captive on the glow plug harness but 3 of mine were loose from the harness. Anyway, I have looked for them online and have not been successful. Does anyone have a part# and a place to get them from?

Thanks,
Andrew

I have 93 parts car pm if you want the harness

N913017005000 nut heater plug. Hope that helps. from the epc epc09941

Just take an old GP to the hardware store and find one that fits.

I think it's different because of the bottom is flared out to be captured in the holder.

Place the wire on the GP stud, slip on a flat washer, lock washer and a nut. will do the same thing.

Charlie

I figured I could just do the hardware store fix. I was just wondering if there was a specific part number. Thanks for the info and the ideas, I hadn't thought about using a washer in place of the recessed part of the nut.

Thanks everyone.