Just got my head back from the shop. Had a couple of bent valves replaced and the head checked for level. The shop also checked the glow plugs so I left them in the head when I sent it in. Well 3 of the glow plugs came back without the nuts on them and the shop claims they don't have them. I realize that they are usually captive on the glow plug harness but 3 of mine were loose from the harness. Anyway, I have looked for them online and have not been successful. Does anyone have a part# and a place to get them from?

Thanks,
Andrew

I have 93 parts car pm if you want the harness

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!

1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!

N913017005000 nut heater plug. Hope that helps. from the epc epc09941

__________________
92 300D 2.5L OM602 OBK #59

Just take an old GP to the hardware store and find one that fits.

__________________
1993 W124 300D 2.5L Turbo, OM602.962
2000 Chevrolet Cavalier, 2.4L DOHC
2002 Ford Explorer, 4.0L SOHC
2005 Toyota Prius, 1.5L

http://www.fuelly.com/sig-us/40601.png

I think it's different because of the bottom is flared out to be captured in the holder.

__________________
92 300D 2.5L OM602 OBK #59

Place the wire on the GP stud, slip on a flat washer, lock washer and a nut. will do the same thing.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works

I figured I could just do the hardware store fix. I was just wondering if there was a specific part number. Thanks for the info and the ideas, I hadn't thought about using a washer in place of the recessed part of the nut.

Thanks everyone.