The size of the hole & the pressure behind it are the 2 factors.

__________________
Grumpy Old Diesel Owners Club group

I no longer question authority, I annoy authority. More effect, less effort....

1967 230-6 auto parts car. rust bucket.
1980 300D now parts car 800k miles
1984 300D 500k miles
1987 250td 160k miles English import
2001 jeep turbo diesel 130k miles
1998 jeep tdi ~ followed me home. Needs a turbo.
1968 Ford F750 truck. 6-354 diesel conversion.
Other toys ~J.D.,Cat & GM ~ mainly earth moving

Since hole sizes don't shrink, that leaves pressure. So what affects the pressure and to what extent? I assume the only two variables here are ambient temp and whether or not the system is being used. And of course the quantity of refrigerant.

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 160k miles
06 E320 CDI "Rutherford", Black on Tan, 179k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 145k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 79k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

O ring conditions are critical.

__________________
"Knowing is not enough, we must apply.
Willing is not enough, we must do." Goethe

***********************************


1951 Chevy 3100

2003 Indian Chief Roadmaster

1983 GMC 1 ton Dually

1982 Chevy 1 ton Dually, service body (sold)

'90 GMC Suburban 6.2 "SS Veg-Burban"
(single tank WVO\diesel conversion) SOLD

'81 300D ~ Mama's car...my job (now my car)(but still my job) SOLD

'83 300sd ~ rescue car SOLD

2005 Ford Taurus (Mama's new car)(NOT my job!)

Some refrigerant top-up cans come with sealant, IIRC. May have sealed the crack. Really the way to tell is tracking system pressure over time. Ice cold AC in march doesn't say much unless you live in AZ.

__________________
CC: NSA

All things are burning, know this and be released.

82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd

You're four times

It's hard to

more likely to

concentrate on

have an accident

two things

when you're on

at the same time.

a cell phone.

www.kiva.org It's not like there's anything wrong with feeling good, is there?

The pressure is going to be affected by which side of the system the leak is on... high or low... there is probably a ' high side cut off switch ' which should limit the high side pressure .... obviously.....
So the time you are running the system and the side the leak is on are major factors...
Have you tried just ' snugging' up all the o ring joints you can reach ? ( use two wrenches and what are called ' line wrenches ' to do this safely...

__________________
1980 240d ,

chain elongation, cam marks reference:
http://www.peachparts.com/shopforum/showthread.php?threadid=10414

http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html

evap fin cleaning:

http://www.peachparts.com/shopforum/showthread.php?t=156207&highlight=evaporator

A/C thread

http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html

I like it, right on the nail.

It is natural for the A/C to leak a little over time, it is just a matter of how little. I read it somewhere that you lose about 1-2oz per year.

__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed.

W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html

1 X 2006 CDI
1 x 87 300SDL
1 x 87 300D
1 x 87 300TDT wagon
1 x 83 300D
1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry.