|
|
|
#1
|
||||
|
||||
Tach reads low
I replace the OVP relay and got my tach working again. However it's reading low....it never gets above 1500 RPM even just before a shift.....so why would it read low?
This is in the 95 E300
__________________
1995 E300 Diesel 1994 E320 1999 C230K 1994 S500 W140 1990 300 SEL |
#2
|
||||
|
||||
Question
Have you checked for this issue?
It would change the wire resistance. MB Wiring Harness Failure http://www.peachparts.com/shopforum/showthread.php?t=128181 .
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ |
#3
|
||||
|
||||
I have done a check of the harness and can't find any signs of this problem...and everything else but the tach is working perfectly.
__________________
1995 E300 Diesel 1994 E320 1999 C230K 1994 S500 W140 1990 300 SEL |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|