1991 300D. There's a compartment behind the fuse box that houses several relays. What do I do to access it? I see four screws....but it looks like they hold down the entire assembly, fuse box included.

Thanks.

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 142k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

I have a 92 and yes take out the 4 screws.

Actually 6 screws: two each in the front, middle, and back. You don't need to remove the screws all the way, just loosen them until the treads are free. Then pull the cover slightly up as you pull it forward. There is a single screw that holds the fuse block in; it s located under the cover in the front center. Again, you don't need to remove it ll the way, just loosen it.

__________________
http://i284.photobucket.com/albums/l...aman/Fleet.jpg

Peach Parts W124.128 User Group.

80 280SL
85 300SD
87 300TD
92 300D 2.5 Turbo
92 300TE 4Matic

Thanks....what I'm hunting for is the combo relay that controls, among other things, the hazard light. That's in there, right?

__________________
14 E250 Bluetec 4Matic "Sinclair", Palladium Silver on Black, 154k miles
06 E320 CDI "Rutherford", Black on Tan, 172k mi, Stage 1 tune, tuned TCU
91 300D "Otis", Smoke Silver on Tan, 142k mi, wastegate conversion, ALDA delete

19 Honda CR-V EX 61k mi
Fourteen other MB's owned and sold
1961 Very Tolerant Wife

Yes it is.

__________________
http://i284.photobucket.com/albums/l...aman/Fleet.jpg

Peach Parts W124.128 User Group.

80 280SL
85 300SD
87 300TD
92 300D 2.5 Turbo
92 300TE 4Matic