|
|
|
|
|
#1
10-31-2011, 10:29 PM
|
|||
|
|||
|
Water at bottom of Doors- 300D
After a rain and the car has been just sitting, I see water dripping through the bottom of both front doors. the bottom lip of the door is rusting out. The door seals are original '78 I would imagine. Thye look intact but I am sure the rubber is too stiff to seal correctly. Is it a big job to change the window seals out?
|
|
#2
10-31-2011, 10:33 PM
|
||||
|
||||
|
if the doors are rusting out, you need to change the window brushes. water gets INTO a door via the windows. water can also get into a badly rusted door if the door seals are bad on top, and the lower trim gets gunked up.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!!  1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
|
#4
11-01-2011, 09:00 AM
|
||||
|
||||
|
correct!
no, sometimes you need to remove the side view mirrors, but usually, you can just pry up the chrome strip, and access to the brush is pretty simple. use a flat plastic putty knife to protect your paint as you pop the chrome up with another prybar tool.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
 |
| Bookmarks |
|
|
Linear Mode
