|
|
|
|
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
02-01-2002, 06:43 PM
|
|||
|
|||
|
Need help with someone who has serviceCD (Vacuum,Throttle linkage)
Can someone who has the MB service cd's please take a look and see if there are any information on a -92 300 DT with regards to the adjustment of vacuumvalves on the IP and transmission?
Info on adjustments of the linkage sure would be nice too. I'm going to check all systems relevant to the operation of the transmission and set them according to spec before I decide what to do with the trans itself.
__________________
/Per MB E300TDT -98 
|
|
#3
02-02-2002, 05:58 AM
|
|||
|
|||
|
That's odd
 It's the 3 litre OM603.960 engine that I have and it's quite common around here as opposed to the 2.5 litre model.
__________________
/Per MB E300TDT -98
|
|
#4
02-02-2002, 07:43 AM
|
|||
|
|||
This is the type of vavle that this engine is equipped with
 The tricky part seems to be the linkage, it has several points of adjustments where it changes the movement ratio between the IPand vacuumvalve versus the bowden cable for the trans. A slight error here I think might be the cause for some odd behavior of the shifting.
__________________
/Per MB E300TDT -98
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| M119 throttle linkage & trouble codes | moruzzi | Tech Help | 19 | 02-04-2005 11:30 AM |
| Is thge throttle linkage supposed to be this way? | JHZR2 | Diesel Discussion | 3 | 01-14-2004 04:52 PM |
| 124 Mono-Wiper linkage failure | Zeitgeist | Diesel Discussion | 7 | 12-10-2003 09:05 PM |
| 82 300SD throttle linkage and cruise control | waybomb | Diesel Discussion | 0 | 12-28-2002 05:52 PM |
| Lots of Slop in 1985 300SD Accelerator Linkage | downeyjc | Diesel Discussion | 2 | 07-25-2001 09:59 PM |
Linear Mode
