Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-14-2012, 09:16 PM
Registered User
 
Join Date: Jan 2005
Location: Chicagoland
Posts: 433
HELP: Electrical problem with E300DT

Fellas,
I have a problem on my hands that is is leaving me scratching my head. I was hoping someone could read my description below and help me identify what the problem could be.
Description of problem
I have a major problem while attempting to start my vehicle. Everything is normal when I insert the smart key into the ignition. The vehicle recognizes the key and locks it in place. Upon turning the key to the first and then second positions for starting is where I run into a problem. After turning the key to the second position, the speedo display goes blank. This means the mileage, temp, etc all goes blank. Then the car starts to make a series of loud clicking sounds which sounds like solenoids clicking on and off. This noise comes from multiple locations both inside the car, and in the engine bay. My cabin HVAC fan turns on blows air. This is really strange to me especially since the fan controls are completely off. My windows will not roll down. Trying to fire the engine up only produces a loud click too, and the starter does not engage. I hooked up my car to my Snap-On scanner tool and the scanner does not recognize that it is hooked up to my car like it normally does.

What was I doing to the car right before this problem occurred?
I was preparing for a 350 mile trip back home. I did my usual inspection of tire pressure, checking the engine bay for any leaks, etc. Everything looked great. I got in the car and it started up without any problems. Upon startup, I received a message on my dash indicating "low coolant". I shut the engine off and popped the hood. I looked in the expansion tank and the coolant level was exactly where it should be so I was a little confused as to why I was getting an error message. I pulled out my Snap-On scanner and hooked it up to the car to read codes. There were no new codes in the system after checking. There was one stored code which was a "drive authorization" code. i cleared this code and removed the scanner. I got back in the car and while attempting to turn the ignition over, I got the symptoms that I've stated above.

Any help? Or links to similar problems and DIY? I'm stuck and I need to get back on the road. Thank you,
__________________
Ed
-1984 Mercedes 190D 2.2 5-speed gray market(bought@30,000 miles) (Sold back to original owner@170,000 miles)
-1999 Mercedes E300DT (245,000 miles)
-1999 Mercedes S500 Grand Edition (80,000 miles)
Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:45 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page