|
|
|
#1
|
|||
|
|||
300D dash work in a 300CD?
Hi all - I've found a black dash from a W123 300D - will this dash interchange into a W123 300CD - exact fit ? Thank you for any direction as I am learning that a lot of coupe items are "coupe only".
|
#2
|
|||
|
|||
It does fit. I swapped one from my fathers 300d into my 300cd several years ago. Be careful though. Remove steering wheel, a pillar trim and be gentle or it will crack if flexed at all.. Hope this helps
__________________
DDC/MTU....Setting the pace 1985 300cd 1983 300d...aka "The Yummymummymobile"....Wifes ride 2006 Wesmac 38' Sportfisherman, Single DDC/MTU 12V-2000 1500 hp |
#3
|
|||
|
|||
yeah, it`s a direct fit.
Everything from the dash forward is the same, the suspentions parts are the same. Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
#4
|
|||
|
|||
As above, yes, it'll fit. If you're doing the pulling, make sure you get the glove box door, too. And if the wood's in good shape, get the complete set since I believe they're "pattern matched".
Best pics/DIY for pulling the dash: PeachPartsWiki: Replacing the A/C Evaporator |
#5
|
|||
|
|||
Everybody - thank you for the confirmation on the dash. Yak - Daryl here in San Antonio - thanks again for all your help a few weekends ago....I've got a laundry list of things to do.....I changed out the injector lines and change the turbo inlet seals like you suggested. I still have some leaking injectors - but better than before. I'll keep you posted. Daryl
|
Bookmarks |
|
|