|
|
|
#1
|
|||
|
|||
What is this line for on my 190D?????
Can someone tell me what this black plastic line is for? I have it shown in the upper right corner of the pic below marked with the red arrow and ? mark. It connects to a brass fitting which is on the end of a metal tube going under and I believe into the oil filter housing. Not sure but looks like vacuum tubing. Thanks
|
#2
|
||||
|
||||
Oil pressure sender for the mechanical gauge. In my swap I removed the pipe at the oil filter housing and installed an electric sender (which is what the gas 190's use)
Don't start the engine without resolving this! You will have a spray of oil flying into the air!
__________________
-diesel is not just a fuel, its a way of life- '15 GLK250 Bluetec 118k - mine - (OC-123,800) '17 Metris(VITO!) - 37k - wifes (OC-41k) '09 Sprinter 3500 Winnebago View - 62k (OC - 67k) '13 ML350 Bluetec - 95k - dad's (OC-98k) '01 SL500 - 103k(km) - dad's (OC-110,000km) '16 E400 4matic Sedan - 148k - Brothers (OC-155k) |
Bookmarks |
|
|