![]() |
|
|
|
|
#1
|
|||
|
|||
Fuse panel
In my 1984 300D W123.
The passenger Front and driver Rear windows do not operate, since these are on the same fuse I thought I would perform a light test while the engine is running. Oh yeah the stock radio does not work, which I need to figure out how to remove for replacement. To my surprise the first row of fuses on the panel are dead, except for the one on the far left and far right. Any suggestion where to look or are these supposed to be dead? . Last edited by whunter; 10-21-2012 at 10:13 PM. Reason: spelling |
#2
|
||||
|
||||
They selle Radio Rmoval Tools.
I had no Radio Removal Tools and got mine out but it was so long ago I don't remember how I did it. I am sure you know what you mean by the First Row but I cannot tell from that description. Why not use the numbered position of the Fuse/s to identify them. Again I cannot remember the Details but I had one of the Wires that is supposed to be soldered to one of the Main Bars in the Fues Box come lose and had a bunch of stuff not work. The Wire was visable by looking down past the Fuse Brackets.
__________________
84 300D, 82 Volvo 244Gl Diesel |
#3
|
||||
|
||||
Answer
Quote:
Please use the numbers for diagnosis, or you will confuse everyone.. http://www.peachparts.com/shopforum/106126-post3.html .
__________________
ASE Master Mechanic https://whunter.carrd.co/ Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 2003 Volvo V70 https://www.boldegoist.com/ |
#4
|
|||
|
|||
My apologies, I will take a photo of the panel and leble it which fuses I read and reading zero voltage.
|
![]() |
Bookmarks |
|
|