|
|
|
#1
|
||||
|
||||
turbo rebuild
I have a 1994 w140 s350 and the turbo seal is gone so I need to rebuild it
problem is I see rebuild kits for earlier 603 garrett turbos but not for my year and model anyone know where I can buy a rebuild kit or rebuilt center section for my 94 350d? yeah I know its the 603.971 rod bender but the oil is coming from the turbo going into the intake thanks....steve
__________________
85 300d in progress |
#2
|
||||
|
||||
Quote:
I am assuming you have a Garrette (Air Research) Turbo. If so there is 3 is 3 possible types of seals that can go on the Compressor end. A Dynamic type seal = Piston Ring type seal A Carbon Seal An Encapsulated Seal The Turbine end always has a Dynamic/Piston Ring type Seal So you choice is take the Turbo apart and see what type of seals it has and/or use the Numbers on the Part Number Plate to ask the Seller if He can tell what Seals you need. Please note that cleaning the Turbo and installing new Bearings and Seals falls short of an actually Rebuild. Although most Members have had good luck doing that. It is possible for the Ring Grooves on the Turbine to be worn beyond spec and the Bearing Bores in the Housing and the Bearing Journals on the Turbine Shaft to be worn beyond spec. No one has posted specs and from what I have read on various internet sites there is no agreement on even what or how to torque the Shaft Nut. Where to buy parts is somewhere in the below links: DIY Repair Links http://www.peachparts.com/shopforum/forumdisplay.php?f=82 http://www.peachparts.com/Wikka/DoItYourSelf
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|