Yeah DrLou, pm me when you are ready.

I installed the injectors and they are running great! Before doing that I popped them one more time by taking slow motion video so I can see the gauge better. At 6" it's a large gauge but the needle fly by really fast and is hard to see. One was 50 psi low so I took it apart and adjusted the shim. Slow motion really help.

Herer's an example video, click to play. Sorry camera was upside down. Is there anyway to flip that in Photobucket?


Here's a video of a new Monark nozzle injector spray pattern. It's a bit wider than a Bosch nozzle.
CLICK TO PLAY


I have the pressure set to 2100 psi, 50 psi past high end of spec. Hard to say how exact but per the slow mo video of the gauge, I would say +/- 10 psi or better. Engine idles smoother and has a different sound to it. Idle also went up 30 RPM to 680.
Here's a video of it running.
CLICK TO PLAY!


When the injectors were out, I couldn't help and fired up the glow plugs to take this pic.

__________________
85 300D turbo pristine w 157k when purchased 167,870 July 2025
83 300 D turbo 297K runs great. SOLD!
83 240D 4 spd manual- parted out then junked