Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-18-2014, 04:10 PM
Registered User
 
Join Date: Jul 2004
Posts: 7,406
what to look for when buying a 2005/06 CDI

Help me out folks. I crashed my daily and need a new one. I'm looking to buy a CDI. What areas that you know of which I really need to be aware of?
USA versions since I'm here in FL.
thanks!

Reply With Quote
  #2  
Old 09-18-2014, 06:05 PM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 14,219
Here you go. Probably a pretty good car seeing as how it is at a dealer.

CDI

A couple of things. Don't get one from anywhere where roads are salted and plan on replacing ball joints between 125 and 170k miles.

The good thing about the 06 model is that you have a couple more years before 10 year warranty on SBC module times out. I think it runs about $1700 at the dealer if out of warranty. Or better yet find a 05 model that has already had it replaced.
__________________
Jim
Reply With Quote
  #3  
Old 09-18-2014, 06:11 PM
Registered User
 
Join Date: Jul 2004
Posts: 7,406
Quote:
Originally Posted by engatwork View Post
Here you go. Probably a pretty good car seeing as how it is at a dealer.

CDI

A couple of things. Don't get one from anywhere where roads are salted and plan on replacing ball joints between 125 and 170k miles.

The good thing about the 06 model is that you have a couple more years before 10 year warranty on SBC module times out. I think it runs about $1700 at the dealer if out of warranty. Or better yet find a 05 model that has already had it replaced.
how much are ball joints? How can I tell if the sbc has been done? If not do I take it to the dealer and say what? I'm looking at a 05 now which looks nice. 143K. 12 grand. if this car falls thru is your wagon for sale?
Reply With Quote
  #4  
Old 09-18-2014, 06:35 PM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 14,219
Wagon ain't for sale. Wife likes it alot (moved her out of the 95 E300 into it).

If you are talking to private owner ask them if it has been changed out and ask to see the receipt. Not sure you can get dealer to run vin and get the info and I have not looked close enough to the one that got changed out on the wagon to see if it is dated. I will try to remember to take a look.

Isn't much to changing ball joints on these models. I get an hour for it.
__________________
Jim
Reply With Quote
  #5  
Old 09-19-2014, 02:11 AM
DeliveryValve's Avatar
Chairman of my Benz
 
Join Date: Jun 2006
Location: Central California
Posts: 4,159
Quote:
Originally Posted by MTUpower View Post
Help me out folks. I crashed my daily and need a new one...
You didn't kill the wagon... Did you?
__________________
1983 123.133 California
- GreaseCar Veg System


Reply With Quote
  #6  
Old 09-19-2014, 09:03 AM
Registered User
 
Join Date: Jul 2004
Posts: 7,406


Runs, drives fine but the condenser and radiator are moved. New those, new pass lights and signal plus hood and quarter panel? Those repairs will be close to $2K. Doesn't make sense for me.
Attached Thumbnails
what to look for when buying a 2005/06 CDI-image.jpg  

Last edited by MTUpower; 09-19-2014 at 09:13 AM.
Reply With Quote
  #7  
Old 09-19-2014, 09:17 AM
Registered User
 
Join Date: Sep 2006
Location: MA
Posts: 543
Data point...Bought my 05 CDI in 2010 with 130k miles. It now has 235k. 99% of my miles were on creative fuel. This is what I've experience in the last 4 years.

- Front left wheel spindle (would have been averted with timely bearing monitoring)
- In-tank fuel pump at 167k (dealer-only part, about $600)
- Thermostat
- Air bag light...faulty wiring in steering column. One of the few things I had the dealer fix...$700
- 3rd brake light...lost about a third of the LEDs, did some soldering to recover most of them...no big deal either way.
- Glow plug here or there. No big deal compared to 606 GPs
- Turbo grenaded itself last week (at 235k). Waiting for replacement to arrive today ($700 for mechanical part, $1200 for whole unit with actuator)

Thiis car is awesome. I would buy another one in a heartbeat. Power, comfort, style. Don't let the list above scare you. All of the things have been minor, and the fuel pump was the only thing that left me stranded.
__________________
Mark in MA
05 MB E320CDI 402k Granite Grey Metallic
05 MB E320CDI 267k Black
05 MB E320CDI 232k White
05 MB E320CDI 209k Tectite Grey
99 Dodge 2500 Cummins 5sp 148k
62 Jeep CJ-6 120k
Reply With Quote
  #8  
Old 09-19-2014, 09:51 AM
jay_bob's Avatar
Control Freak
 
Join Date: Oct 2011
Location: Columbia, SC
Posts: 3,942
My white wagon looked like that before I got it.

My story: http://www.peachparts.com/shopforum/diesel-discussion/326138-buying-1987-300td.html

Don't let it go to the crusher, someone on this board will want it.

What is the current location?
__________________
The OM 642/722.9 powered family
Still going strong
2014 ML350 Bluetec (wife's DD)
2013 E350 Bluetec (my DD)

both my kids cars went to junkyard in 2023
2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles)
2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles)

1998 E300DT sold to TimFreeh
1987 300TD sold to vstech
Reply With Quote
  #9  
Old 09-19-2014, 11:02 AM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 14,219
How much you want for it and where it is at? I've got a 95 E300 sitting here that would make a great parts car. Still runs and drives out good.
__________________
Jim
Reply With Quote
  #10  
Old 09-19-2014, 12:40 PM
Moderator
 
Join Date: Dec 2001
Location: Southern California, U.S.A.
Posts: 8,538
Quote:
Originally Posted by engatwork View Post
How much you want for it and where it is at? I've got a 95 E300 sitting here that would make a great parts car. Still runs and drives out good.
If it's in FL, you're just one state over.
__________________
Paul S.

2001 E430, Bourdeaux Red, Oyster interior.
79,200 miles.

1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
Reply With Quote
  #11  
Old 09-19-2014, 12:42 PM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 14,219
yep

A 95 E300DT would be nice.
__________________
Jim
Reply With Quote
  #12  
Old 09-19-2014, 01:14 PM
Registered User
 
Join Date: Jul 2004
Posts: 7,406
My wagon is at my home in Palm Beach county, FL. Interested parties are more than welcome to make an offer on it. Nice cream leather in good shape. No third row seat. Strong engine. The junkyard will give about $500.
Reply With Quote
  #13  
Old 09-19-2014, 08:11 PM
Registered User
 
Join Date: Jul 2004
Posts: 7,406
The 05 cdi is in the driveway. 143K. dark metallic green which looks like black. Nice drive from FTL to PBC on the turnpike. I think I did the right thing. Pics to follow.
Reply With Quote
  #14  
Old 09-19-2014, 08:37 PM
engatwork's Avatar
Registered User
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 14,219
Nice
__________________
Jim
Reply With Quote
  #15  
Old 09-20-2014, 08:40 PM
Registered User
 
Join Date: Sep 2007
Location: Calgary Alberta Canada
Posts: 2,043
Curious to know how much longer you plan on keeping your car for? I would assume you maintain the brake system yourself and is that a difficult job did you need any special software or is it just a procedure. I am just thinking of looking at the same car several are for sale here an 05 about the same mileage $9500 and a 06 with 80k miles for $17000 which seems a bit pricy.

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page