1983 240d motor mount question
 

Im in need of alittle help... I just replaced the 2 front motor mounts (square ones) and the transmission mount (triangle looking one) and the car seems to vibrate alittle harder. Is there perhaps another engine mount that im missing? When i replaced the first 2 there was a noticable difference.. When the transmission mount came in a couple of days later i had it changed out and its vibrating more than it did before i changed any of them.

Did you follow any instructions in the FSM for your car which might have described a ' gauge' which you make to be sure you have placed your engine properly when doing the engine mounts ?

No i didnt.. I didnt know anything about it. Are there any threads on here that you may know of that can help me. Is this a guage thats purchased or one in the engine compartment already? and thanks for the quick reply and help

They want you to make it yourself... so the specs are in the FSM...

There is also a mount on some cars that goes forward or rearward from the deep sump to a rubber lined pocket in the cross member. Check that and I bet you'll find the new side mounts raised it enough to touch metal to metal.