|
|
|
|
|
#1
10-08-2014, 09:03 PM
|
|||
|
|||
|
1983 240d motor mount question
Im in need of alittle help... I just replaced the 2 front motor mounts (square ones) and the transmission mount (triangle looking one) and the car seems to vibrate alittle harder. Is there perhaps another engine mount that im missing? When i replaced the first 2 there was a noticable difference.. When the transmission mount came in a couple of days later i had it changed out and its vibrating more than it did before i changed any of them.
|
|
#2
10-08-2014, 10:04 PM
|
|||
|
|||
|
Did you follow any instructions in the FSM for your car which might have described a ' gauge' which you make to be sure you have placed your engine properly when doing the engine mounts ?
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/showthread.php?threadid=10414 http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/showthread.php?t=156207&highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html
|
|
#3
10-08-2014, 10:15 PM
|
|||
|
|||
|
No i didnt.. I didnt know anything about it. Are there any threads on here that you may know of that can help me. Is this a guage thats purchased or one in the engine compartment already? and thanks for the quick reply and help
|
|
#4
10-09-2014, 06:59 AM
|
|||
|
|||
|
They want you to make it yourself... so the specs are in the FSM...
__________________
1980 240d , chain elongation, cam marks reference: http://www.peachparts.com/shopforum/showthread.php?threadid=10414 http://www.peachparts.com/shopforum/diesel-discussion/305365-9-degrees-chain-stretch.html evap fin cleaning: http://www.peachparts.com/shopforum/showthread.php?t=156207&highlight=evaporator A/C thread http://www.peachparts.com/shopforum/diesel-discussion/297462-c-recommendations-mb-vehicles.html
|
|
#5
10-09-2014, 08:42 AM
|
||||
|
||||
|
There is also a mount on some cars that goes forward or rearward from the deep sump to a rubber lined pocket in the cross member. Check that and I bet you'll find the new side mounts raised it enough to touch metal to metal.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.  [SIGPIC]..I also have a 427 Cobra replica with an aluminum chassis.
|
 |
| Bookmarks |
|
|
Linear Mode
