|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Need to put together a list of parts for adding cruise control to a W123.
I'm trying to put together a list of all the components needed to swap cruise control from one vehicle to another (or to delete the cruise control system from a car). In this case, we're dealing with a W126 (donor) and a W123 (recipient), both with OM617's. I also have a 190e I could pull bits from.
So far, I have: VDO cruise module, in engine bay. Steering column stalk. After that, I'm pretty clueless what all goes into a cruise control system. |
#2
|
||||
|
||||
Controller module - under dash. Look straight up beside the brake pedal, remove 1 10 mm nut and pull down
Wiring harness starting at the controller and ending at the actuator under the hood Stalk Switch and the column cover with the cutout Vehicle Speed Sensor on back of speedometer
__________________
The OM 642/722.9 powered family Still going strong 2014 ML350 Bluetec (wife's DD) 2013 E350 Bluetec (my DD) both my kids cars went to junkyard in 2023 2008 ML320 CDI (Older son’s DD) fatal transmission failure, water soaked/fried rear SAM, numerous other issues, just too far gone to save (165k miles) 2008 E320 Bluetec (Younger son's DD) injector failed open and diluted oil with diesel, spun main bearings (240k miles) 1998 E300DT sold to TimFreeh 1987 300TD sold to vstech |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|