The backing plate on one of my rear hubs has rusted to the point that the hand brake parts don't sit square. Since replacing the plate requires pulling the bearing, and the cost of a new plate is high, I'm thinking that the best solution is to get a complete corner assembly...knuckle, bearing, flange, backing plate from a yard, and take a chance on the used bearing. In the worst case, I'd have to replace the bearing which I would need to do with a new plate anyway. And if I'm lucky, bolt it in and done. But here's the question:

Many Mercedes rear suspension components are interchangeable. What other models would have an assembly that would fit?

124 should be the same.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!