![]() |
|
|
|
#1
|
|||
|
|||
identify injectors
__________________
190D SOLD 2.5 non turbo 5 speed manual transmission Build date: December 1985 W211 E320 CDI W126 350SDL X204 GLK 250 Sans Bluetec |
#2
|
||||
|
||||
yup, OM617
|
#3
|
||||
|
||||
Yeah, the turbo uses 135 bar.
115 for non turbos and the four cylinder.
__________________
83 SD 84 CD |
#4
|
|||
|
|||
300D, 300SD, 300DT all used the same engine and injectors, assuming the turbo engine (OM617, all U.S. engines in 1985), w/ caveat: DT heads differed slightly. The injectors were 135 bar, as printed on yours. That said, you are just looking at the injector housing. The true injector is the innards, and the internal spring and shims sets the pop pressure, but unlikely the innards were swapped.
I think other Euro diesel manufacturers used the same or similar Bosch injectors, but don't know the differences.
__________________
1984 & 1985 CA 300D's 1964 & 65 Mopar's - Valiant, Dart, Newport 1996 & 2002 Chrysler minivans |
#5
|
|||
|
|||
Then it's off to the classifieds to sell em. I'll contact previous owner again though as I think they were rebuilt recently. I figured they were the same as all other turbo 617 but wanted to be sure
__________________
190D SOLD 2.5 non turbo 5 speed manual transmission Build date: December 1985 W211 E320 CDI W126 350SDL X204 GLK 250 Sans Bluetec |
![]() |
Bookmarks |
|
|