1996 E300, OM606

I plan on pulling the injectors from the engine and having a local Bosch shop go through them for me. I see that this engine uses the same heat shields as the OM616 in the '74 - I've got a pile of those.

In digging around on Pelican I found these:

Fuel Injector Seal (Lower)
Part #: 001-017-73-52-M14

Where does this seal go? I searched the peachy forums and the WWW and didn't find mention of replacing these when installing the injectors. I'm curious about their application.

And am I correct in assuming that the upper fuel injector seal (Part #: 606-016-02-21-MBZ) is the o-ring that seals between the valve cover and injector well?

Thanks!

__________________
- Greg -
1973 220D, The Prodigal Benz
1974 240D

001-017-73-52 is an internal part of the injector (Part 137 on Figure 1)

601-017-00-60 is the heatshield (Part 146 on Figure 1)

606-016-02-21 is the o-ring (Part 23 on Figure 2)

Attached Thumbnails

   

__________________
78 W116 300SD 'Desert Rose' new as of 01/26/2014
79 W116 300SD 'Stormcloud' RIP 04/11/2022

Awesome! Thanks for the information.

__________________
- Greg -
1973 220D, The Prodigal Benz
1974 240D