|
|
|
#1
|
|||
|
|||
Decal for CCU Temp Wheel
I am still cleaning up 85sd that I picked up couple months ago. While driving around to test my Roll Guy Delete Kit I adjusted the temp on CCU and the decal fell off.
Can I get another decal or at least the wheel? I have to go inside the console any to fix radio issuse so would like to take care of at same time. As always I appreciate your help greazer2b |
#2
|
|||
|
|||
The degree C strip is 124 821 29 67.
Degree F might be 124 820 10 03 if it is still available (replaces 201 821 01 67, 124 821 31 67, 124 821 34 67). While you have your pushbutton unit out, check your solder connections between the 2 vertical connector boards to the main board. They often develop cracks. Last edited by Rick76; 10-19-2017 at 07:54 AM. |
#3
|
||||
|
||||
Cool, didn't even think these were available, is there one for the manual system from the 240D?
__________________
1983 W123 300TD US spec Turbo engine, with Euro bumpers and manual climate control, and manual transmission. |
#4
|
|||
|
|||
Ask James Dean where to get them if they aren't easily found.
__________________
85SD 240K & stopped counting painted, putting bac together. 84SD 180,000. sold to a neighbor and member here but I forget his handle. The 84 is much improved from when I had it. 85TD beginning to repair to DD status. Lots of stuff to do. |
Bookmarks |
|
|