OM617 Torque Values Rocker Arm
Hello All,
Replaced the valve stem seals on an OM617 and cannot find the torque values for the rocker arm assembly bolts. They are long, 8mm, hex bolts that look like they are supposed to stretch. Thanks, 1982 300D |
Rocker Arm Bearing Brackets to Cylinder Head 38 Nm
|
Retorqued to 38 Nm. Seems so low but I have no experience with these tapered, stretch bolts.
Thank you for the prompt response. Like an overnight gift. I awake to the answer. Thank You Diesel911 |
I would make sure that the stretch bolts are not "one time" use. In some applications, they cannot be reused once removed. Good luck!!
|
Quote:
With the head bolts on a 617.952 that is different. Even they can be reused if you measure the the length and they are still within spec. If not they need to be replaced. Why having access to the service manual is important! |
All times are GMT -4. The time now is 04:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website